1．必須遵守礦山一般安全規程、廠內道路運輸安全規程及道路交通法的規定。

　　1. It is necessary to comply with the general safety regulations of the mine, the safety regulations of road transportation in the factory, and the provisions of the Road Traffic Law.

　　2．啟動前，必須對設備的安全防護裝置進行詳細檢查，確認正常后，方可開動。

　　Before starting, it is necessary to conduct a detailed inspection of the safety protection devices of the equipment and confirm that they are normal before starting.

　　3．設備維修保養時，司機必須做好維檢修安全確認制。設備加油時，禁止吸煙和動用明火。

　　When repairing and maintaining equipment, drivers must establish a safety confirmation system for maintenance and repair. Smoking and the use of open flames are prohibited when refueling equipment.

　　4．開動前，必須檢查設備周圍有無障礙物，確認無誤后，方可鳴笛起步。

　　Before starting, it is necessary to check for any obstacles around the equipment and confirm that there are no errors before sounding the horn to start.

　　5．設備在行駛和作業時，車輛外各部禁止乘坐站人，禁止上下車，嚴禁接打手機，需接打時必須停在安全地點。

　　During the operation and driving of the equipment, passengers are prohibited from standing outside the vehicle, boarding and disembarking are prohibited, and it is strictly forbidden to make or receive phone calls. When making or receiving calls, they must be parked in a safe location.

　　6．禁止在坡道上停車，遇有故障時必須采取止輪措施，拉上制動器。

　　6. It is prohibited to park on a slope. In case of a malfunction, measures must be taken to stop the wheels and apply the brake.

　　7．工作后，必須將車輛停放在平坦場地，確認無誤后方可離開。

　　After work, the vehicle must be parked on a flat surface and confirmed to be correct before leaving.

　　本文由 濟南壓路機租賃   友情奉獻.更多有關的知識請點擊  http://www.aaayd.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Roller Rental For more related knowledge, please click http://www.aaayd.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.